confirm final

hackpads/Soup-Pad/firmware/code.py

@@ -0,0 +1,117 @@
+from kmk.kmk_keyboard import KMKKeyboard
+from kmk.keys import KC
+from kmk.modules.neopixel import Neopixel
+from lib.adafruit_hid.keyboard import Keyboard
+from lib.adafruit_hid.keycode import Keycode
+import board
+import busio
+import digitalio
+import time
+from adafruit_ssd1306 import SSD1306_I2C
+from adafruit_dht import DHT11  
+from mcp23008 import MCP23008  
+
+
+keyboard = KMKKeyboard()
+
+
+i2c = busio.I2C(scl=board.SCL, sda=board.SDA)
+mcp = MCP23008(i2c)
+
+
+rows = [mcp.get_pin(i) for i in range(4)]  # GP0, GP1, GP2, GP3
+cols = [mcp.get_pin(i) for i in range(4, 7)]  # GP4, GP5, GP6
+
+
+for row in rows:
+    row.switch_to_input(pull=mcp.Pull.UP)
+for col in cols:
+    col.switch_to_input(pull=mcp.Pull.UP)
+
+
+keyboard.row_pins = rows 
+keyboard.col_pins = cols  
+keyboard.diode_orientation = DiodeOrientation.COLUMNS
+
+
+keyboard.keymap = [
+    [KC.N1, KC.N2, KC.N3],  # First row also i will adjust them as needed later as it would e very much time consuming to adjust them now
+    [KC.N4, KC.N5, KC.N6],  # Second row
+    [KC.N7, KC.N8, KC.N9],  # Third row
+    [KC.KP_PLUS, KC.N0, KC.KP_MINUS],  # Fourth row
+]
+
+pixel = Neopixel(pin=board.D0, num_pixels=12, colors=[(255, 0, 0)], brightness=0.2)
+keyboard.modules.append(pixel)
+
+
+encoder1_a = digitalio.DigitalInOut(board.D6)
+encoder1_b = digitalio.DigitalInOut(board.D10)
+encoder2_a = digitalio.DigitalInOut(board.D3)
+encoder2_b = digitalio.DigitalInOut(board.D9)
+
+
+encoder1_a.switch_to_input(pull=digitalio.Pull.UP)
+encoder1_b.switch_to_input(pull=digitalio.Pull.UP)
+encoder2_a.switch_to_input(pull=digitalio.Pull.UP)
+encoder2_b.switch_to_input(pull=digitalio.Pull.UP)
+
+
+oled = SSD1306_I2C(128, 64, i2c)
+
+
+dht_sensor = DHT11(digitalio.DigitalInOut(board.D2))  # DHT11 sensor on D2 pin
+
+
+encoder1_pos = 0
+encoder2_pos = 0
+
+
+def read_distance():
+   
+    return 50  #its for now i will add the sensor code later
+
+
+while True:
+    keyboard.process()
+    
+    
+    try:
+        temperature = dht_sensor.temperature
+        humidity = dht_sensor.humidity
+    except Exception as e:
+        temperature = None
+        humidity = None
+        print("Failed to read DHT11:", e)
+
+
+    if not encoder1_a.value:
+        if not encoder1_b.value: 
+            encoder1_pos += 1
+            keyboard.send(KC.VOLD)  
+        else:  
+            encoder1_pos -= 1
+            keyboard.send(KC.VOLU)  
+
+    
+    if not encoder2_a.value:
+        if not encoder2_b.value:  
+            encoder2_pos += 1
+            keyboard.send(KC.MPRV)  
+        else:  
+            encoder2_pos -= 1
+            keyboard.send(KC.MNXT)  
+
+    
+    distance = read_distance()
+    volume_level = max(0, min(100, 100 - distance))  # conveting distance to volume level
+
+   #oled
+    oled.fill(0)  
+    oled.text("Temp: {}C".format(temperature), 0, 0)
+    oled.text("Hum: {}%".format(humidity), 0, 10)
+    oled.text("Distance: {}cm".format(distance), 0, 20)
+    oled.text("Volume: {}".format(volume_level), 0, 30)
+    oled.show()  
+
+    time.sleep(0.01)  #for rest lol