hackpad/hackpads/Jayden'sCustomizablePad

Jayden's Customizable Pad is a 12 key macropad with a rotary encoder + led diodes. It also uses KMK firmware. The Customizable Pad was created for the Hack Club HackPadV2 YSWS and this is my first time designing something like this.

Purpose: Really anything... It was originally for a num pad, but then I decided that I wanted some other features, so it can be used for more than a number pad

CAD Model: I had to spend over 3 hours and 3 complete restarts in order to get the hackpad to fit and be centered to the best of my ability. I tried to use the instructions, but eventually I just did the math. The design is pretty basic: a simple block case and a cover.

PCB: I also spent a while on this because I didn't know how to wire properly. The wiring looks haywire + messy, but I think I did ok for this being my first time.

Schematic: https://cdn.hackclubber.dev/slackcdn/5ed5928f0e2107b77a3a53bfbd2ec95b.png I didn't know how to start this YSWS so I spent the first 1-2 weeks trying to understand how to designa schematic, and now I have a better understanding... Had a lot of help though

BOM: EC11 Rotary Encoder x1 Seeed XIAO RP2040 x1 SK6812 MINI-E LEDs x12 M3x16mm screws x4 Blank DSA keycaps Black x12 Blank DSA keycaps White x12

Custom Parts: Huano Cherry Blossom Lini (Lubricating) x12 $0.47 * 12 = $5.64 w/o tax

Note My PCB is about 0.513mm over the limit, but I was informed that was ok, which is why one of the requirements was not checked off Note