hackpad/hackpads/Legitmate-Salvage

Legitmate-Salvage

This is the Legitimate Salvage. It is a macro pad that includes ten keys, one rotary encoder, and one OLED screen. The firmware I set up allows three different tabs, and the OLED screen shows the current tab. This is my first time participating in a Hack Club event. I have only recently been learning Fusion and have never used KiCad or QMK, which was an exciting new opportunity. The hardest part was working with QMK, as I have no experience with firmware, and it was hard to find help or tutorials for the process.

Cad Model

There is 2 peices the base and the top which fit together with m3 bolts I made it with fusion

PCB

I made it in kicad I used most of the recomended footprints but some I had to find on my own I hope its right Schematic PCB

Firmware Overview

Uses QMK Firmware

• Rotary encoder changes volume for evreything
• Top Left button changes tabs
• OLED shows current tab
• the other buttons it depends on the current tab being used

BOM (Bill of Materials):

• 1x Seeed XIAO RP2040
• 9x Through-hole 1N4148 Diodes
• 10x MX-Style switches
• 1x EC11 Rotary encoder
• 10x Black Blank DSA keycaps
• 4x M3x16mm screws
• 4x M3 hex nuts
• 1x 0.91 inch 128x32 OLED

Schematic	PCB	Case

Extra Stuff

This is my first hackclub project. Next I think I am going to work on the infill project becuase why not.