| .. | ||
| cad | ||
| pcb | ||
| production | ||
| README.md | ||
-
4x M3 16mm screws
-
1x PCB
-
3x 3d-printed case parts
-
1x Seeed Studio XIAO RP2040
-
4x Cherry MX switches
-
4x DSA keycaps
-
1x EC11 rotary encoder
-
In this project, I learned a lot and also had lots of fun. It was an new experience for me, learning how to design and make my PCB using KiCAD, with invaluable help from the seniors. I faced a few problems, like having extrude errors on OnShape, but everything else went relatively smoothly. By far the most difficult part was doing the PCB, as I was not familiar at all with the software and PCB's in the first place, whereas OnShape I had some background knowledge. My hackpad is going to be a spotify music helper.
-
Rotary encoder= volume Switch 1 = Skip Swith 2 = previous Switch 3 = pause/resume Switch 4 = mute/unmute button for discord mic