System-End/hackpad
1
0
Fork 0
mirror of https://github.com/System-End/hackpad.git synced 2026-04-20 00:35:24 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
hackpad/hackpads/MIC-Pad
History
Myzomi 44986534b9 uploaded folder w/files
2024-10-21 22:02:57 -04:00
..
CAD uploaded folder w/files 2024-10-21 22:02:57 -04:00
firmware uploaded folder w/files 2024-10-21 22:02:57 -04:00
PCB uploaded folder w/files 2024-10-21 22:02:57 -04:00
production uploaded folder w/files 2024-10-21 22:02:57 -04:00
BackPCB.png uploaded folder w/files 2024-10-21 22:02:57 -04:00
FrontPCB.png uploaded folder w/files 2024-10-21 22:02:57 -04:00
README.md uploaded folder w/files 2024-10-21 22:02:57 -04:00
semiFinalCase.png uploaded folder w/files 2024-10-21 22:02:57 -04:00

README.md

Military Industrial Complex Pad

First time making anything w/pcbs, so this was a learning experience. I'm not sure if I'll ever make another one, but I'm glad I did it. The biggest struggle was working with CAD software in general ( Using Shapr3D ) and I spent wayyy too much time creating the 8 screw holes needed for the case.

About

This is a 5x4 numpad with a 128x32 OLED display. image image image

Notes

This is a 150mm long PCB which is outside the 100mm limit for the pcb. But I'm grandfathered in because I made the PCB before the 100mm limit was put in place. (Check the slack! @blahajfromikea)

BOM:

  • 17x Cherry MX switches
  • 17x Through-hole 1N4148 Diodes
  • 17x DSA Keycaps ( if possible send 3 2-unit long Keycaps )
  • 8x M3 Heat-Set Inserts
  • 4x 12mm M3 Bolts
  • 4x 18mm M3 Bolts
  • 1x Seeed XIAO RP2040 (through-hole)
  • 1x 4 Pinheader 2.54mm Vertical
  • 1x SSD1306 0.91 inch 128x32 I2C OLED (4 pin)
  • 1x PCB
  • 1x All-White (If possible) PLA Case. (3 .stl files)