mirror of
https://github.com/System-End/hackpad.git
synced 2026-04-19 21:05:15 +00:00
17 lines
1.3 KiB
Markdown
17 lines
1.3 KiB
Markdown
Ready to submit your project? Nice job! Hopefully you've read the [submission guidelines](https://hackpad.hackclub.com/submitting). **If not, make sure to read them first.**
|
|
|
|
Check off the following to let the reviewers know you've done everything:
|
|
[] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
|
|
[] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
|
|
[] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
|
|
[] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
|
|
[] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
|
|
[] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
|
|
- Full render including all the parts
|
|
- A few sentences about the inspiration and challenges
|
|
- BOM
|
|
- Photos of the Schematic, PCB, and case
|
|
|
|
If you're unsure about the format, make sure to check out this [example]([insertexample](https://github.com/hackclub/hackpad/tree/main/hackpads/Duccs%20Fidget%20Toy)) and follow the format there.
|
|
|
|
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
|